NAPA Auto Parts NAPA Montréal - Pointe-aux-Trembles
12215 RUE SHERBROOKE E
POINTE-AUX-TREMBLES,  QC  H1B 5L4
(514) 642-7996
Reserve Online Participant
Flyer Program Participant
Store Hours
OPEN NOW
Mon-Fri:7:30 AM-6:00 PM
Sat:8:00 AM-3:00 PM
Sun:8:00 AM-3:00 PM
This store has been geolocated for you.

text.skipToNavigation
NAPA KNOW HOW

NAPA KNOW HOW

  • Home
  • How to Winterize Your RV

TOPICS

As the summer RV season comes to an end and the temperature begins to drop, it’s time to think about prepping your RV, trailer, or camper for winter storage. Ideally, winterizing should happen before temperatures fall below 0°C to protect your RV’s water system, battery, and exterior from freeze and cold damage.

While winterizing may not be necessary if you’re storing your unit somewhere warm and sheltered, it’s smart to do it anyway since Canadian weather can be so unpredictable.

Keep reading to learn what steps you should take to properly winterize your travel trailer, camper, or Class C motorhome to protect your unit’s inner system and its exterior from damage.

Empty the Water System

A water system that hasn’t been properly winterized may still have water left in the lines. Once temperatures fall below 0°C, lines can freeze and crack.

To properly winterize your RV or trailer water system, start by shutting off your water supply and water pump before turning off the water heater. Give the heater time to cool completely and release any built-up pressure before you open it.

Once the water heater is fully cooled, you can safely open its drain plug or anode rod to fully drain the hot water tank.

Next, locate and open the freshwater tank’s drain valve, which is normally located near the bottom of the tank or plumbing.

Then remove the low point drain caps on your water lines and open all faucets to release water out of the system. Close all faucets, reapply the low point drain caps, and add non-toxic RV plumbing antifreeze to your water system.

Check your owner’s manual for a bypass valve or kit before pouring antifreeze down the drains and into the water tank. This will ensure the water heater tank is skipped as antifreeze runs through the system.

Now turn on your water pump to help move the antifreeze through the pipes. Open each faucet one at a time until antifreeze appears to make sure the entire system is fully flushed.

For any additional concerns, consult your owner’s manual for model-specific steps to properly winterize your unit’s water system. If you have multiple appliances in your RV, trailer, or camper, for example, this process will involve a few extra steps. Even a little leftover water can freeze, expand, and severely damage the plumbing in your unit. So, triple-check that you’ve cleaned everything out before storing it away for the winter.

Battery Care for Storage

Before putting your RV into storage, make sure you fully charge the batteries batteries and turn off the battery disconnect and breaker switches. Next, remove the batteries by disconnecting the negative cable first. Once the batteries are out of your RV, make sure they’re stored in a cool, dry location.

For some RVs, it’ll make more sense to leave the batteries inside the unit. If you choose this option, disconnect the negative cable and periodically check the charge levels over the winter to avoid a dead battery by spring.

Give It a Deep Clean

Your RV has collected a lot of dust, grime, and bug residue from your many travels over the summer. Before placing your unit into storage, use a pre-wash treatment on the exterior to remove oily and greasy build-up. Then fully clean it with soap and water to remove any remaining grime.

Sealant should be applied on exterior cracks to prevent water leaking in.

If your unit will be stored outside, apply a finishing layer of wax or protectant as a final step to protect its exterior from cracking or peeling.

While you’re working on the outside of the unit, check your tires and headlights for wear and see if they need to be replaced. This step can help you identify any damage that’ll need to be taken care of before the next camping season.

It’s likely the inside of your RV needs a clean-up. A multi-purpose cleaner should be used on interior surfaces to remove stains and return floors, walls, and counters to pristine conditions.

Pre-winter cleaning is very similar to spring cleaning. However, one main difference is that you may remove certain items from the trailer to protect them from the cold.

Have Your Locks Serviced

Finish up your winterizing routine by protecting your unit’s locks. Locks can seize up, especially if water, sap, or grime gets into the mechanism and cause sticking or corrosion.

Before putting your RV away for the season, lubricate all locks and hinges to prevent jams and breaks. A little product goes a long way, so start with small amounts and only add more if needed.

Your owner's manual will have more details on how to prepare your unit for winter. If you can’t locate the manual, look up your unit’s specifications online to find any information you need.

After winterizing your RV, trailer, or camper, you can still use it for winter camping. Just be aware that you won’t be able to use the water system. Once winter comes to an end, you’ll want to brush up on how to get your mobile home ready for the road again with this maintenance guide.

Don’t forget that your car also needs to be prepped for winter. Check out this article on how to winterize your vehicle.

For additional support winterizing your RV, trailer, or camper, stop by your local NAPA Auto Parts store to speak with an expert or browse our full range of RV maintenance tools and supplies at www.NAPACanada.com.