NAPAPièces d'auto NAPA Montréal - Pointe-aux-Trembles
12215 RUE SHERBROOKE E
POINTE-AUX-TREMBLES,  QC  H1B 5L4
(514) 642-7996
Réservez et ramassez en magasin
Circulaire : magasin participant
napaRewardsLogo
Heures d'ouverture
OUVERT MAINTENANT
LUN : 07:30-18:00
MAR : 07:30-18:00
MER : 07:30-18:00
JEU : 07:30-18:00
VEN : 07:30-18:00
SAM : 08:00-15:00
DIM : 08:00-15:00
Ce magasin a été géolocalisé pour vous.

text.skipToNavigation
Clé à chocs compacte M12 fuel 3/8po Milwaukee

Clé à chocs compacte M12 fuel 3/8po Milwaukee

No de pièce: MIL 256220
Ligne: MILWAUKEE TOOLS
Pourquoi?

Cet article n'est actuellement pas en stock à votre magasin, mais il est possible de le commander. Veuillez appeler au magasin afin de vérifier le lieu et les modalités de livraison pour cet article. Des frais d'expédition supplémentaires peuvent être exigés.

La quantité demandée n'est pas disponible. Veuillez corriger la quantité ci-dessous.
ENVOYER À UN AMI PAR COURRIEL

Caractéristiques et avantages

GARANTIE: Standard : Voir la garantie écrite détaillée du fabricant.

Télécharger

The new MILWAUKEE® 3/8”Stubby Impact Wrench delivers the Most Power, Is Lighter Weight&More Compact whiledelivering50% Faster Application speeds. Leveraging POWERSTATE™ Brushless Motor, The Stubby Delivers 0-3,000 RPM with up to 550 ft-lbs of Nut Busting Torque, allowing the removal of the most corroded and stubborn applications. This Milwaukee® solution delivers on performance andsize,at only 2.2 lbs bare tool. Users will experience less fatigue throughout their work week while fitting into tight spaces and allowing access wherelargerimpactscan'tfit without using additional accessories ordisassembling components to reach the desired fastener.Equippedwith Tri LED work lights to illuminate your work area without the frustration of shadows. 4-Mode DRIVE CONTROL™ for greater precision and customization to your desired power output, including AUTO SHUT-OFF™ that applies no more than 15 ft-lbs of torque for hand-tight applications that prevent overtightening when in forward. In reverse, bolt removal mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, youwill be able tochange modes effortlessly.


  • Lighter Weight & More Compact
  • Up to 550 ft-lbs of Nut-Busting Torque
  • 50% Faster Application Speeds

Spécifications

Type de connexion rapide N/A
Marque Milwaukee Tool
Poignée de type ergonomique No
Boîtier inclus Non
Réglable Non
VMRS Code 053006053
Dimension de l'entraînement 3/8 in
Avec ou sans fil Cordless
SDS requis Non
Piles incluses No
Pivotant No

Information Sur La Securite

Véhicules compatibles

Évaluations du produit