Lubricants & Penetrants

WHAT IS LUBRICANT AND PENETRATING OIL?

Canada is well known for its long, harsh winters. While road salt helps us Canadians drive safely, as the snow melts, moisture and salt can build up on our vehicles, causing rust damage from accelerated oxidation.

If you've done maintenance or repairs on vehicles in Canada, you've likely encountered a frozen bolt, stuck nut, rusted screw, or other types of corroded fasteners. Fortunately, there's an easy solution to these frustrating issues: lubricant and penetrating oil. Trying to remove a rusty bolt without using a lubricant or penetrating oil can weaken the bolt, round it, or snap the bolt head off completely. These fluids are used to loosen, clean, and protect metal parts from rust and corrosion.

To loosen and free even the rustiest bolts and fasteners, try spraying them with a product like WD-40 Specialist Rust Release Penetrant or Kleen-Flo Honey Goo XX Penetrant. If you want to avoid the headache of a snapped bolt, make sure to read our article on how to remove a rusted bolt. To stay prepared in case you do need to remove a snapped bolt, consider getting a bolt extractor set or a screw extractor set.

CHOOSE THE BEST LUBRICANT AND PENETRATING OIL

At NAPA Auto Parts, we offer a wide selection of lubricants and penetrating oils to lubricate, penetrate, loosen, protect, and rustproof the nuts, bolts, and other metal fasteners on your car, truck, or SUV.

Depending on the application, you may want to use one of the following kinds of lubricant or penetrating oil:

1. Anti-seize is available in aluminum, copper, and graphite to prevent galling, corrosion, and seizing.
2. Brake lubricant is used to dampen vibrations between disc brake pads and caliper pistons.
3. Multi-purpose grease is used for lubricating parts like bushings and bearings.
4. Assembly lubricant is used for engine assembly to prevent metal parts from scuffing and galling during initial engine startup.
5. Air tool oil lubricates air tools to improve operation, extend tool life, and reduce premature wear.
6. Cutting and grinding oil is used for metalwork and machining operations as a coolant and reduces surface tension.

Choose the best lubricant and penetrating oil from brands like Permatex, CRC, and Kleen-Flo. Order online and pick up your purchase at a NAPA Auto Parts near you.